「イエンス クロック・レポート」第一回 by茶処〜届きました!

 By : Guest Blog


2018年に横浜で行われたイベント「ドイツ時計とスチームパンク」にてオーダーした、イエンスシュナイダー氏のハーフセコンドクロックが、今年8月末に届きました。


作成者のイエンスシュナイダー氏が組み立てのために来日し、なんと我が家に来てくれました!(まぁ、来るだろうとは思ってました笑)

当日は先に納品されたオーナー氏、イエンスシュナイダー氏、日本での技術担当の斎藤氏、通訳の宮田氏に立ち会っていただき組み立てから打ち上げまでを行いました。
関係者の皆様に感謝いたします。



4年かかって届いたこのクロック。
実はオーダーは一番最初だったのですが、私の希望とイエンス氏のやりたい事を組み合わせるとどうしても時間がかかることになり、順番が前後する事になりました。
コロナでさらに遅れ、、、ようやく届いたのです!


さて、クロックの仕様等については、気が向けば書いていきたいと思いますが、今回は・・・
先に納品されているオーナー氏のクロックと違い、このクロックは時打ち機構を積んでおり、毎時鐘が一回鳴る仕様です。

これはオーダー時に絶対に組み込んで欲しいと希望して対応して頂きました。結果、世界に一台だけのイエンスシュナイダー氏が作成したアワーストライクハーフセコンドクロックとなってます。

異国情緒を感じる音に妻共々毎日しみじみしつつ、毎時鐘が鳴る事で生活リズムができてとてもいい感じです。ダラダラと携帯触ったり、本読んだりする方には最適だと感じています(苦笑)


細かい仕様は資料をご確認ください。


【仕様書】
Half-second pendulum clock

[general]
Design :Freestanding table pendulum
Height x Width x Depth (mm) :605x230x142 (socket 340 x 217)
Mass :18.5 kg
Dial for the seconds :Diameter161mm, breakthrough 117 mm
Hour-minute dial :Diameter 62 mm, inner part 37 mm, center distance 39.20 mm
Display acoustically :Hourly beat every hour on the hour on three gong rods, can be switched off
Ads visually :Hour, minute, second
Battery life :>1year at 18 000mAh battery capacity (4 years without hourly rate)
Power supply :3x alkaline monocell LR 20 /1.5 Volt, operating voltage 4.5 Volt
Vibration duration pendulum :1s (half-second pendulum)
Type of drive :Magnetic pendulum with Hipp's contact (self-regulating amplitude)

[Case and dial]
Construction :Overlaid, three-part dismountable solid wood gehäuse with marble beam, door hinged on the left
Material :Smoked oak solid milled, glued and screwed with lateral glazing
Surface :Matted and waxed with shellac
Glass :5mm thick, faceted
Baseplate :Marble top base30 mm/back wall 20mm thick
Work carriers :Aluminium, movement swivelling
Dial :Two-piece dial, central second and separate dial for hours and minutes, material 3mm brass grain silver-plated, inscription engraved and black laid out, bezels solid brass, gloss-nickel-plated
hands :Two-piece steel hands, crowned by hand, hardened and left blue

[Clockwork]
Base :Drive Brillié Type1556, refined, two-part (second work and minute hourly work)
Frame Seconds :Mounted on the dial support (aluminium ring), pillar movement, front bridge hand-engraved
Frame Minutes- HourLy Works :Solidly turned aluminum board, intermediate board attached with pillars and massive clatters
Frame Hipp's drive :Aluminium base plate with attached, solid cups
Continuation :With each pendulum oscillation to the left every second due to weight-loaded gear lever and jack
Rastung second jump :Stone-bearing locking roller directly on the second wheel, titanium lever
Continuation of minute hands :Spring-loaded lever with jack, jump through asymmetrical heart curve with loose
Hour hand :Adjustable on both sides
Pendulum switch :Hipp's contact with free-hanging tongue in combination with asymmetrically ground sapphire, contact lever with platinum pin, contact pairing platinum-gold, spark extinguishing by red LED and resistance 100 ohms

[Pendulum]
Total length (mm) :330 (22 2.5 to center sphere)
Mathematical length (mm) :248,5
Pendulum ball :Diameter 59.5 mm, mass 870g, material brass nickel-plated
Pendulum rod :6mm Invar
Dissimulation :Rotation of the ball on fine thread 14x0,74
        1 rotation=120s
        1 division=2.0s

[Pendulum drive]
Coil :0.236 mm copper enamelled wire, 180 ohms, 25mA working current at 4.5V

[Hourly rate]
Hour gong :3 steel rods, attached at the same time
Drive :Tensile magnet with neodymium bar magnets
Coil :0.67 mm enamelled copper wire, 1.3 ohms, spark extinguishing by red LED and resistance 100 ohms
Working current :3.5 A at 4.5 V